All Products > Industrial Weighing Solutions > Calibrators and Diagnostics > Load Cell Tester

Load Cell Tester

The load cell tester 1008 allows to test and calibrate a four load cell system in only few minutes, using a simple but practical serial cable connection. The LCT 1008 allows for download of measurement results to a PC via an USB or RS232 connection.

Features

◉ Supports four independent weighing channels.
◉ Simultaneous visualization of each individual load cell signal.
◉ Automatic compensation and integrity verification of the individual load cell as well as the load cell connection.
◉ Zero check of the load cell
◉ Linearity check of the instrument.
◉ Read/write of setup file.
◉ Monochrome graphic display with touch screen.
◉ Easy connection to Junction Box SL-5

Application

All weighing and force measurement systems using load cells

Specification

Overall dimensions

PARAMETER	VALUE
Power supply	4 × 1.5 V alkaline batteries AA size 4 × 1.2 V NiMh rechargeable batteries AA size
Operating temperature range	–10 to +50°C
Storage temperature range	–20 to +70°C
Display/Keyboard	monochrome LCD touch screen
Overall dimensions	185 x 93 x 36 mm (L x W x H)
Enclosure	Palm in ABS
Protection degree (front)	IP65
Load cells connections	standard: D-sub 25-pin connector; optional: cable with spring terminals
Load cells excitation voltage	3.3 VDC / 50 mA (max 4 × 350 Ω LCs)
4 individual load cells channels with the following performance
Linearity	<0.02% of full scale
Internal resolution	24 bit
Weight display resolution	Up to 50,000 counts
Input signal range	From -3.9 to +3.9mV/V
Decimal digits	Up to 3