Torque Measurement - TorqueTrak Revolution
The TorqueTrak Revolution Series is a torque and power monitoring and control system that features inductive (non-contact) power and data transfer for continuous operation. Designed for applications that require ongoing measurement of torque and/or horsepower, the TorqueTrak Revolution system is custom-machined to install on existing shafting up to 40 inches (1016 mm) in diameter.
- ◉ Easy Installation: Rotating Collar and stationary power coil are split and bolt around the shaft. Shaft modification is not required.
- ◉ Convenient Calibration: Use at factory settings or utilize easy scaling and adjustment tools.
- ◉ No tuning required.
- ◉ Reliable Operation: Inductive power and data transfer with generous clearance between stationary and rotating parts. No wear surfaces.
- ◉ Digital Data Transmission: Delivers a clean, noise-free data signal with 14-bit resolution.
- ◉ Robust Construction: Sturdy hardware and electronics, built for demanding environmental conditions.
- ◉ Onboard Intelligence: System status indicators confirm proper operation and aid in troubleshooting.
- ◉ Industry : Power Generation, Paper, Marine, Steel, Automotive, Pumps & Compressors
- ◉ Sensor Input : Full Bridge Strain Gage ( 4 active arms, upto 1000 W acceptable )
- ◉ Bridge Excitation : 2.5V DC
- ◉ Sensor Range : ± 500 microstrain ( Full Bridge , 4 Active arms )
- ◉ Lineartity : £ 0.05% FS
- ◉ Receiver Output signal : Four independent current output signals :
- ◉ Torque, Power , Shaft speed & Shaft direction
- ◉ Receiver Input Power : 115 V / 230V AC , 11V - 16V DC standard
- ◉ Resolution : 14 Bits
- ◉ Sampling Rate : 4800 Hz
- ◉ Operating temperature : -40 Dg C to 85 Deg C