Torque Measurement - TorqueTrak 10K-LP
The TorqueTrak Torque and Power Monitoring System (TPM2 series) is a rugged precision instrument designed to measure torque and/or power on rotating shafts in real time using precise strain-gage sensors. The TPM2 is custom designed to fit on shafting as low as . 75″ (19mm) and up to 48″ (1220 mm) in diameter.Torque Measurement Systems measure true mechanical torque and power on rotating shafts.
- ◉ Easy to Use – Fits any size shaft, any torque level. No machine modifications or disassembly required. Calibration is done off-the-shaft. Receiver display and keypad offer user-friendly interface.
- ◉ Low Profile – Ideal for applications with very low radical clearance.
- ◉ Infrared Remote Control – Control transmitter operation including channel select, gain/range, shunt calibration and low-power standby mode.
- ◉ Reliable Data Transmission – Clean, noise-free data signal through analog voltage output or digital data output via RS-232.
- ◉ Standby Power Mode – Extends transmitter battery life without disconnecting battery.
- ◉ 16 Channels – 500 Hz Frequency Response Use; multiple systems simultaneously.
- ◉ User Adjustable Gain – Amplify the strain/torque signal to the most useful level.
- ◉ Industry : Power Generation, Paper, Marine, Steel, Automotive, Pumps & Compressors
- ◉ SENSOR INPUT: Full (four-arm) Wheatstone Bridge strain gage (350Ω standard)
- ◉ BRIDGE EXCITATION : 3.0 VDC
- ◉ SENSOR RANGE : ± 125 microstrain to ± 4000 microstrain
- ◉ TRANSMISSION FREQUENCY: 903-925 MHz
- ◉ TRANSMIT DISTANCE: Upto 3 Mtrs
- ◉ TRANSMITTER BATTERY LIFE : 48 hours in Transmit mode
- ◉ VOLTAGE OUTPUT: ±10 VDC, field adjustable 0.25x to 4.0x
- ◉ 5-way binding posts (banana jacks)
- ◉ DIGITAL OUTPUT CONNECTION: RS232 type DB9 connector (cable provided for PC COM port)
- ◉ RECEIVER POWER INPUT: 12VDC nominal (10 – 18VDC acceptable), 300 mA max (110VAC or 220VAC adapter provided)
- ◉ SAMPLE TRANSMISSION RATE: 2400 samples/sec