Torque Measurement - TorqueTrak TPM2
The TorqueTrak Torque and Power Monitoring System (TPM2 series) is a rugged precision instrument designed to measure torque and/or power on rotating shafts in real time using precise strain-gage sensors. The TPM2 is custom designed to fit on shafting as low as . 75″ (19mm) and up to 48″ (1220 mm) in diameter.Torque Measurement Systems measure true mechanical torque and power on rotating shafts.
- ◉ Easy Installation – Rotating Collar and Stationary Ring are split and bolt together around the shaft. No Machine assembly or Shaft modification is required.
- ◉ Robust Construction – Sturdy hardware and electronics, built for demanding environments.
- ◉ Reliable Operation – Inductive power and data transfer with generous clearance between stationary and rotating parts. No wear surfaces.
- ◉ System Status Indicators – Confirm proper operation at a glance. Expedites troubleshooting.
- ◉ Easy-on Collar – Rotating Collar is designed to accommodate small variations in shaft diameter and clamps to the shaft using standard tools.
- ◉ Communications Made Easy – High-speed bi-directional communications link interfaces with PC or PLC. User-selectable sample rate up to 4800 samples/second.
- ◉ Product Support – Backed by BEI’s proven outstanding customer service, before and after the sale.
- ◉ Industry : Power Generation, Paper, Marine, Steel, Automotive, Pumps & Compressors
Sensor Input : Full Bridge Strain Gage ( 4 active arms, upto 1000 W acceptable )
- TORQUE SENSOR
- TORQUE SENSOR INPUT:
- ◉ Strain gage bridge, 350 ohms (std), 120 ohms (min)
- ◉ Input Range: user-selectable from 0.025 to 32 mV/V
- TORQUE SIGNAL BANDWIDTH: 10 user-selectable settings from 3 to 1000 Hz
- SHAFT SPEED AND DIRECTION:
- ◉ Measured once per revolution
- ◉ Resolution:1 5 bit (32,768 points), auto-ranging
- COMMUNICATION INTERFACE:
- ◉ RS(EIA)-442 full duplex, up to 1000 ft (300 m) run
- ◉ Baud Rate: Auto-detectable from 1200 to 460,800 bps
- ◉ Sample Rate: 10 user-selectable settings from 9.375 to 4800 samples/sec
- OPERATING ENVIRONMENT: -40° to +70° non-condensing