INDUSTRIAL AUTOMATION, QUALITY MEASUREMENT AND LABORATORY SOLUTIONS

All Division Wise Products > Industrial Weighing Solutions > Calibrators and Diagnostics > LCT 1008 Load Cell Tester /Calibrator

LCT 1008 Load Cell Tester /Calibrator

The load cell tester 1008 allows to test and calibrate a four load cell system in only few minutes, using a simple but practical serial cable connection. The LCT 1008 allows for download of measurement results to a PC via an USB or RS232 connection.

Features

  • ◉ Supports four independent weighing channels.
  • ◉ Simultaneous visualization of each individual load cell signal.
  • ◉ Automatic compensation and integrity verification of the individual load cell as well as the load cell connection.
  • ◉ Zero check of the load cell
  • ◉ Linearity check of the instrument.
  • ◉ Read/write of setup file.
  • ◉ Monochrome graphic display with touch screen.
  • ◉ Easy connection to Junction Box SL-5

Application

  • All weighing and force measurement systems using load cells

Specification

Overall dimensions
PARAMETER VALUE
Power supply 4 × 1.5 V alkaline batteries AA size 4 × 1.2 V NiMh rechargeable batteries AA size
Operating temperature range –10 to +50°C
Storage temperature range –20 to +70°C
Display/Keyboard monochrome LCD touch screen
Overall dimensions 185 x 93 x 36 mm (L x W x H)
Enclosure Palm in ABS
Protection degree (front) IP65
Load cells connections standard: D-sub 25-pin connector; optional: cable with spring terminals
Load cells excitation voltage 3.3 VDC / 50 mA (max 4 × 350 Ω LCs)
4 individual load cells channels with the following performance
Linearity <0.02% of full scale
Internal resolution 24 bit
Weight display resolution Up to 50,000 counts
Input signal range From -3.9 to +3.9mV/V
Decimal digits Up to 3