INDUSTRIAL AUTOMATION, QUALITY MEASUREMENT AND LABORATORY SOLUTIONS

325 Precision Calibrator

The Model 325 precision calibrator supplies high accuracy millivolt-per-volt level signals for testing, calibrating, and troubleshooting process weigh system instrumentation.

Precise output reference selections from 0 to 3.5mV/V are achieved by using a metal film resistor network; discrete wire wound resistors, and a 2-pole, 8-position rotary switch. Input and output impedance values of 350, 700, and 1000 Ω are selectable to simulate all typical strain gage transducers.

Features

  • ◉ Portable, on-site calibration and servicing—accurate to 0.02% of selected range
  • ◉ Eight selectable ranges: 0, 0.5, 1.0, 1.5, 2.0, 2.5, 3.0 and 3.5 mV/V
  • ◉ Three bridge impedance selections: 350, 700, or 1000 Ω
  • ◉ Calibrate any strain gage based instrument or transmitter
  • ◉ Rugged, impact resistant aluminum case

Application

  • Testing, calibrating, and troubleshooting process weigh system instrumentation

Specification

PARAMETER VALUE
PERFORMANCE
Output Accuracy 0.02% of selected range
Accuracy Stability (0.5 and 1 mV/V steps) less than 0.01% in 24 hours less than 0.02% in 1 year
Zero Stability less than 3 μV
Span TC ±10 ppm/°C
Input Impedance (Excit.) adjustable to ±0.05%
Output Impedance (Signal) adjustable to ±0.08%
Output Ranges 8 steps: 0, 0.5, 1.0, 1.5, 2.0, 2.5, 3.0, and 3.5 mV/V
Input Voltage Level 25 VDC maximum
Operating Temperature Range 32°F to 120°F (0°C to 50°C)
Vernier Range up to 106% of selected step
Impedance Adjustmen 350, 700, or 1000 Ω
MECHANICAL
Dimensions, LxWxH 6 × 3.2 × 1.8 in.
Unit Weight 15.7 oz